CEMB USA ER85 (A) - Manual (Page 20)

20
1
2
3
3
1 2
Use and maintenance manual Rev. 09-2013
ENGLISH
6.2 UNBALANCE OPTIMIZATION
The program allows total wheel out-of-balance to be
reduced by compensating, when possible, tyre and rim
out-of-balance values. It requires two runs, rotating the
tyre on the rim on the second run.
Having performed a run, press + 1 and
follow the on-screen instructions.
6.3 STATISTICS
DAILY N° OF RUNS:
Indicates the number of runs performed as from switching
on the machine. Such parameter is automatically reset after
switching the machine off.
TOTAL N° OF RUNS:
Indicates the number of runs starting from the date indicated
in square brackets. This parameter remains memorized even
when the machine is switched off.
The following buttons are enabled:
press to reset the relative
counter.
For the TOTAL counters a correct password must be ente-
red.
to access the weight statistics screen
to return to the previous screen
to return to the measurement screen.
6.3.1 Weight statistics screen
Each horizontal line indicates the number of clip-on and adhe-
sive weights used to balance the wheels in the period between
the two dates indicated on the screen (in square brackets).
Tot g (Tot oz):
indicates the total weight value (clip-on
and adhesive weights) used to balance
the wheels in the interval indicated on
the screen
Tot n: indicates the total number of clip-on and
adhesive weights used to balance the
wheels in the interval indicated on the
screen
The following buttons are enabled:
press and enter the password to reset the
weight statistics screen
to return to the previous screen
to return to the measurement screen
INdIcATIoN
To enable saving of the weight statistics
( WEIGHT STATISTICS)
The weights are saved only if the unbalance display pitch
is set to 5 in 5.
Menu