Castle AT-8 Operator Manual - Manual (Page 8)

CASTLE, INC AT‐8 OWNERS MANUAL V2.1 Page 8 of 30
2.3 Machine Requirements
Your Castle AT-8 Face Frame Assembly Table requires a minimum of 85 PSI air not to exceed
150 PSI.

Supply Line should be a minimum of ¼” line.

Install an air filter trap to reduce the potential for foreign particles and water from
your air supply prior to entry into the machine. The filter should be mounted to the
wall where your supply comes from and SHOULD NOT be mounted to your machine.
2.4 Other Supplies
 Plywood sheet at least 8’ X 4” (not included)