Castle AT-8 Operator Manual - Manual (Page 5)

CASTLE, INC AT‐8 OWNERS MANUAL V2.1 Page 5 of 30
2 Machine Safety
NOTICE: The Castle Frame Assembly Table was designed with operator safety as a priority.
This machine was carefully prepared for shipment at our factory. Upon receipt of the machine,
inspect for shipping damage. Report any damage IMMEDIATELY to the freight company, your
Castle dealer and to Castle, Inc. DO NOT attempt to operate the machine if you observe any
physical damage. Contact Castle, Inc. at 800.282.8338 for instructions.
2.1 Key Features
Your AT-8 Face Frame Assembly Table’s ergonomic design places the bottom rail at 32” above
floor level to reduce bending, reaching and operator fatigue. The highly efficient design allows
the hold-down cylinders to be repositioned and clamped in one quick smooth action for fast
production. The super rigid, high precision beam is both light and strong and moves effortlessly
on ball bearings.
The AT-8 is equipped with a pressure regulator, pressure gauge and hose for a pneumatic air
screw driver (sold separately). The convenient screw tray is inches away from the work at all
times.
2.2 Inventory
Included with each AT-8 Face Frame Assembly Table are the following items. Please take a
moment to verify that each of the items listed below and on the following pages are included with
you shipment.
 Owners
Manual
 Warranty Card – Please fill out and mail to Castle, Inc. or visit our website at
www.castleusa.com and register online.
 Hardware: (See following page for hardware details)