Castle AT-8 Operator Manual - Manual (Page 19)

CASTLE, INC AT‐8 OWNERS MANUAL V2.1 Page 19 of 30
4.2 Screw Bowl Holder
The Screw Bowl is held in place by the red lever on the Clamp Arm Bottom Bracket. Pull the
lever down to release the bowl and push it up to hold the bowl in place.
4.3 Optional Screw Gun Airline
Your Castle Assembly Table comes with a 3/8” AT Gun Hose Assembly [C08000] . To attach the
Air Screw Gun (optional) remove the red plug from the regulator and connect the AT Air Gun
Hose Assembly. Next, thread the hose through the aluminum arm. Connect your Air Gun to the
bottom end of the hose.