C.E. Niehoff & Co. N7485 DE Housing Replacement Instructions - Manual (Page 2)

C. E. Niehoff & Co. • 2021 Lee Street • Evanston, IL 60202 Tech Services Hotline 800-643-4633
II0107A Page 2 of 2
Position new drive end housing over remaining 8 through-studs as shown in Figure 2.
Figure 2 — Setting New Drive End Housing in Position
Torque values for connections:
Phase lead nuts—30 lb. in. 28 V B+ terminal nut—80 lb. in.
Field coil lead nuts—30 lb. in. 14 V B+ terminal nut—80 lb. in.
Through-stud nuts—45 lb. in. B– terminal bolt—80 lb. in.