Kaiser KCT 69.. - Manual (Page 68)

68
EN
Using the automatic preheating function
 Select the required cooking area by means of
the key
1.
 Select power level 9 by means of key ( +) 2,
then press the (
+) key 2 again to activate
preheating. The letter «A» will be shown on
the relative display
3.
 To preheat the unit with spontaneous
movement towards the required power level
(e.g. 6), set the power to 6 by means of the (
–
) key
2.
After the system has set to automatic preheating
mode, the display panel will alternate the set power
level («6») and the automatic preheating function
(indicated by the letter «A»)
3.
Switching off the automatic preheating Function
 To deactivate the preheating function
(indicated by the letter «A» on the display),
press the key (
–) 2
At least 10 seconds since the function has been
activated.
Timer function
This function too simplifies operation by not requiring
human supervision during the cooking cycle.
Once the set time on the timer has elapsed, the
cooking area is automatically switched off.
If no zone has been programmed, the timer simply
operates as a minute counter (see the section «Using
the timer as a minute counter»).
3
1 2