Kaiser KCT 69.. User Manual

Page 26

Switching OFF an individual cooking zone

To switch off an individual cooking zone, the
respective cooking zone has to be selected with the
cooking-zone-selectkey (

+) 1.

The selection is indicated with the static dot in the
respective cooking zone display

If the controlrecognizes that the (

+)-key 1 and the (–

)-key

3 have been activated simultaneously the

setting of the selected cooking zone will be put back
to «0».

Alternatively, the (

–)-key can be used to count down

the setting to «0».

If all cooking zones are at «0», all decimal points in
the cooking zone displays are blinking.

If a cooking zone is hot,

H will be displayed instead

of «0».

Switching-OFF all cooking zones

Immediate switching-off of all cooking zones can be
achieved anytime by means of the ON/ OFF key

In the Stand-by- mode an

H appears on all cooking

zones which are «hot».

All other cooking zone displays are not illuminated.

Wattage settings

The output of the cooking zones can be set in 9
steps which are indicated by the figures «1» thru «9»
by means of LED sevensegment-displays.

Automatic heat-up function

When the automatic heat-up function is activated the
wattage of the cooking zone is at 100% for a certain
heat-up time which is dependent on the selected
(continious) setting.

At the end of the heat-up time the electronic control
switches back to the preselected simmering setting.