Kaiser KCT 69.. User Manual
Page 28

28
EN
Starting process of the automatic heat-up
Control is ON and a cooking zone will be selected.
The automatic heat-up will be activated by
setting the output level «9» and operating the
(
+)-key 1 for a second time.
The requested continious setting will be
selected with the (
+) 1 and (–)-key 2, the
chosen setting appears in the display
3.
3 seconds after the last key operation (selection of
the setting) and within 16 seconds after activation of
the heat-up function, the symbol «
А» (which stands
for the heat-up boost) appears on the display
3, in
alternation with the chosen setting.
If a lower setting will be selected with the (
–) key 2
after the «
А» has appeared in the display, the
automatic heat-up function will be interrupted.
By means of the (
+)-key 1 a higher continious setting
can be chosen, here the duration of the heat-up
boost will be automatically adapted to the actual
selected setting.
When the heat-up time is over, the selected
(continious) setting will be indicated on the display.
Residual heat indicator
It is meant to indicate to the user that the glass
ceramic has a dangerous touch temperature in the
circumference of a cooking zone.
After switching-OFF the cooking zone the respective
display shows
H until the assigned cooking zone
temperature is in an uncritical level (no more 60 °C).
1
2
3