Kaiser KCT 69.. User Manual
Page 60

60
EN
COOKING ZONES CONTROL
MODELS KCT 39...
Switching on the hob
Press the key
1 to activate the control: the
adjustment level indicators
2 and the timer
display
3 are set to «0» while the decimal
points
4 flash.
Perform the next operation within 10 seconds;
otherwise the device will switch off automatically.
Adjusting power and the timer by means of the
(+) and (–) keys.
Use the (
+) and (–) keys to adjust the setting of
the plates and the required time on timer/ minute
counter.
The
(
+) and (–) controls are common to
both functions. Accordingly, to regulate the
power of the hob, first select the zone with
key
5, then adjust the relative power level
using the (
+) and (–) keys 6; this done.
Select the timer function with key
7 and
proceed to set the duration, likewise using
the (
+) or (–) key 6.
Switching on the cooking area
Once the device has been activated, switch on the
cooking area (within 10 seconds) as follows:
Press one of the keys
5 to select the
cooking area required. The relative display
2 will indicate a «0» and the decimal point
4 will illuminate to show that the cooking
area has been activated.
Use the (
+) and (–) keys 6 to adjust the
heat level (from 1 to 9).
Press and hold down these keys to increase or
decrease the setting.
1
3
5
6
7
4
2