Kaiser KCT 69.. User Manual
Page 36
36
EN
Dual-circuit cut-off
Depending on the design it is possible to operate dual
circuit radiant heating elements with the Touch
Control.
When a multi-circuit heating element is put into
operation, all heating circuits are switched- on at the
same time.
If only the inner heating circuits should be used, the
outer heating circuit can be switched-off by means of
the multi-circuit key or in individual steps.
By operating the multi-circuit key
1 the
respective outer circuit of the assigned active
cooking zone can be cut-off any time.
An activated outer circuit will be indicated by an
additional LED
2.
A renewed operation of the multi-circuit key will add
the outer circuit(s) at any time.
The assigned LED´s
2 glow again.
Timer function
The timer function is realized in two versions.
Stand-alone timer 1 – 99 min: sound signal when the
time is over «countdown tmer».
This function is only available when the cooktop is not
in operation, i.e. when there is no cooking,
Cooking zone timer 1 – 99 min: sound signal when
the time is over, four cooking zones can be
programmed independently.
1
2