MoTeC SDL - Manual (Page 10)

8 Overview
Functions:
• Shift Lights – Controls up to 3 staged shift lights.
• Engine Log – Can be used to record engine running times during the
specified condition
Calculations:
The SDL can calculate and display any of the following:
• Lap Time, Running Lap Time, Lap Number.
• Ground Speed, Drive Speed, Lap Distance, Trip Distance, Odometer.
• Lap Time Gain / Loss continuously displays how far behind or ahead the
vehicle is compared to a reference lap.
• Current
Gear.
• Minimum Corner Speed, Maximum Straight Speed.
• Fuel Used, Fuel Remaining.
• Two 2D and two 3D Lookup Tables
Measurement Inputs
The SDL measurement inputs can be connected to a wide variety of sensors.
This allows the SDL to measure vehicle parameters such as: Suspension
Movement, Wheels Speeds, Steering Angle, Engine Temperature etc.
Input Types
The SDL has a number of different input types which are designed to suit the
different types of sensors.
The following inputs are available:
• 8 Voltage Inputs
• 4 Temperature Inputs
• 1 Optional Wide Band Air Fuel Ratio Input (Lambda Input)
• 2 Switch Inputs
• 2 Digital Inputs