MoTeC ADR - Manual (Page 8)

ADR Functionality User Manual Configuration
Events Tab
Figure 4 – Device Configuration – Example Event Tab
The functions of the parameters on the Events tab are as follows.
Important:
Before selecting triggering methods and thresholds it is important to have a good understanding of event triggering.
Read
Event Triggering on page 14 before configuring triggering.
Trigger Method Determines how the three axes of acceleration are used in triggering.
Event trigger level Threshold for triggering event logging.
Severe event trigger level Threshold for treating a logged event as a severe event.
Trigger low pass filter Sets the level of filtering applied to the accelerometer output before used in
event triggering.
MoTeC — Published: 11 February 2014 Page 7