Dialight D1RW-L13-008 Vigilant L866/L885 LED Based Dual Red / White Catenary User Manual
Page 16

Document No.
9100-127-1426-99 Rev D
Release Date: 10/26/2010
_____________________________________________________________________
_____________________________________________________________________________
Dialight Corporation 1501 Route 34 South Farmingdale NJ 07727
Tel: 732.919.3119 Fax: 732.751.5778 Web: www.dialight.com
Page 16 of 25
Section 17: 100-240Vac Operated Systems
When it is required to operate the system from a 100-240V mains supply, an
additional AC to 48VDC power supply is required (recommended p/n:
D1RW9004).
It is recommended that this supply be rated for at least 120W output.
If the system is to comply with FAA 150/5345-43F, certain details of this standard
should be considered when choosing the power supply.
Section
3.3.8 and 4.2.9
6kV/3000A combination-wave, transient test.
3.3.15 and 4.2.11
1.414kV/10uA leakage current test
4.2.2
+55ºC operational test
4.2.3
-40ºC operational test and -55ºC storage test