Bray 6A Series Quick Start - Manual (Page 7)

Calibration
Step 9: Acknowledge that the calibration was
successful by pressing the ‘
‘ button
once and returning to the configuration mode.
Exit the configuration mode by holding down
the ‘ ‘ button >5 seconds.
Step 10: The device will now be in ‘MANUAL’
mode. The display should resemble the above
screen.
Step 11: Using the ‘ ‘ and ‘ ‘ buttons,
manually open and close the valve to ensure
that the desired travel limits are being
attained.
Step 12: Toggle between ‘MAN’ mode and
‘AUTO’ mode by pressing the ‘ ‘ button.