Bray Pneumatic Actuators & Accessories - Manual (Page 11)

All information herein is proprietary and confidential and may not be copied or reproduced without the expressed written consent of BRAY INTERNATIONAL, Inc.
The technical data herein is for general information only. Product suitability should be based solely upon customer’s detailed knowledge and experience with their application.
Pneumatic Actuator & Accessories
Switch Options : 11
Series 50 Switch Options
MICRO SWITCHES
Economical switches with the highest
current ratings on the market.
Two V3 Type SPDT SWITCheS
Contact material is fine silver.
Max. Rating:
10A-120/250VAC
1/2A-125VDC
Max. Temperature: 176°F (80°C)
4 or more switches are available.
Two Type DPDT SWITCheS
Contact material is fine silver.
Max. Rating:
10A-120/250VAC
10A-24VDC
Max. Temperature: 158°F (70°C)
PROXIMITY SWITCHES
Sealed against explosive gases and
liquids, these switches offer long,
trouble free life.
Two V3 Type N INDUCTIVe
SWITCheS
(Intrinsically Safe)
Supply Volts:
5-25VDC
Load Current: <1mA >3mA
Max. Temperature: 212°F (100°C)
Other types available, consult factory.
Two V3 Type e2 INDUCTIVe
SWITCheS
Supply Volts:
10-30VDC
PNP Type:
Load Current:
100mA
Max Temperature: 212°F (100°C)
Other types available, consult factory.
PNEUMATIC SWITCHES
For hazardous locations. 2 switches
are provided with 2 ports and vents.
Rating: 150 psi (10 bar)
Connections: 1/8” NPT (BSP)
Max. Temperature: 176°F (80°C)
POTENTIOMETER
For analog feedback of precise valve
position, a potentiometer can be
mounted within the Series 50–0700
housing.
The standard value is 10K ohms, and
the standard power rating at
158°F(70°C) is 1 watt.
REED SWITCHES
2 magnetic reed switches
(hermetically sealed) are available
upon request.