B&K Precision 4040B - Manual - Manual (Page 75)

75
Examples: SWRAte 50MS
Query
Syntax:
SWRAte?[MINimum|MAXimum]
Response: NR3
SWSTArt
This command sets the start frequency of the sweep:
Arguments
Type:
Numeric.
Units: MHz, KHz, Hz (default)
Range: Dependent on the frequency range of the
current function.
Command Type: Setting or Query
Setting
Syntax:
SWSTArt[units]
SWSTArtMINimum|MAXimum
Examples:
SWSTArt 5KHZ
SWSTArt 5E3
SWSTArt MAXIMUM
SWSTArt MIN
Query
Syntax:
SWSTArt?[MAXimum|MINimum]
Examples: SWSTArt ?
SWSTArt ? MAX
Response:
NR3
SWSTOp
This command sets the stop frequency of the sweep: