B&K Precision 4040B - Manual - Manual (Page 39)

39
1
Table 2
– Error Messages
Message
Text Description
Out of range
The set value is out of the instrument’s
limits.
Setting
conflict Settings conflict with another
parameter setting or value.
Empty
location Attempt to recall settings from an
empty storage location.
Trig rate short Internal trigger rate is too short to
output waveform or burst.
Save RAM New firmware installed.
3.13 Quick Start
This section explains how to generate various waveforms
and modify the output waveform.
* Generating a waveform output
* Modifying waveform output
* Storing and recalling a waveform generator setup
3.13.1 Selecting a Standard Waveform
You can select several standard waveforms as: sine,
triangle, square. Creating a standard waveform requires
selecting the waveform type, parameters and their
settings that define the waveform.
Generating a standard waveform requires the following: