B&K Precision 4040B - Manual - Manual (Page 67)

67
1) The MIN and MAX arguments refer to currently
settable minimum or maximum.
2) FIXed is alias for CW.
AMPLitude
The amplitude command is used to set the peak-to-peak
amplitude of the output waveform. Note that the amplitude
and the offset are limited by the relation:
Peak Amplitude + |Offset| <= 5V
Arguments
Type:
Numeric
Units: V, mV, VPP, mVPP
Range: 10mV to 10V
Rounding: 1mV for 10mV to 999mV. 10mV for 1V to
10V.
Command Type: Setting or Query
Setting
Syntax:
AMPLitude[units]
AMPLitudeMINimum|MAXimum
Examples:
AMPL 2.5
AMPL 2.5V
AMPL MAX
Query
Syntax:
AMPLitude? MINimum|MAXimum]
Examples: AMPL?
AMPL? MAX
Response:
NR2
Considerations: