B&K Precision 4040B - Manual - Manual (Page 74)

74
SWEep
This command activates or deactivates sweep:
Arguments
Type:
Boolean
Command Type: Setting or Query
Setting
Syntax:
SWEON|OFF|LIN|LOG
Examples: SWE ON
SWE LIN
Query
Syntax:
SWE?
Response: OFF|LIN ON|LIN OFF|LOG ON|LOG
OFF
Note: Sweep will automatically be active if set to Linear or
Logarithmic.
SWRAte
This command sets the time for one complete sweep:
Arguments
Type:
Numeric
Units: S, mS, uS, nS
Range: 10mS to 100S
Command Type: Setting or Query
Setting
Syntax:
SWRAte[units]
SWRAteMINimum|MAXimum