Avision @V2800 User Manual
Page 34
27
Copier Default: Used to specify the product’s default copy settings. Note when
system auto reset time is over or the device is turned on and off again, the copy
settings will be reset to these values.
Item
Description
Basic
Image Density Adjust the image density in seven steps using the control
panel. And you can specify the default value of image
density in the range of 1 to 7 using the product’s Web Page.
Increasing the value makes the printouts darker and
decreasing the value makes the printouts lighter.
Choice: 1, 2, 3, *4, 5, 6, 7
Copy Mode
Choose the focus of your copy result. For example, if your
document contains many pictures, choose Photo. If your
document contains text only, choose Text. Speed mode is a
standard mode for all documents.
Choice: *Speed, Text, Photo.
Image Edit
Erase Border
Sets the length of border you wish to cut.
Choice: *0/0.25/0.5/0.75/1.0 inch or
*0/6/13/19/25 mm.
Margin
Adjustment
The “Margin Adjustment” option will move the copy image
to the right or/and to the bottom; depending on “Right” and
“Bottom” parameters.
Choice for Right or Bottom: *0/0.25/0.5/0.75/1.0
inch or *0/6/13/19/25 mm.
Unit
Choose the unit you wish to use.
Choice: *Inch, mm
* Factory Default