Avision @V2800 - Manual (Page 120)

113
5 Troubleshooting
Information Message
Information Messages During Scanning and Copying
Message Action
ADF paper
empty Press the OK button. Reload your document on the auto
document feeder and try again.
ADF cover
opens Close cover and press the OK button.
Flatbed cover
opens Close cover. Clear paper in the ADF and press the OK
button.
Flatbed Light
Check Restart your product.
If the code still appears, contact your nearest dealer.
Calibration
Error Restart your product.
If the code still appears, contact your nearest dealer.
Error_Flatbed
Home Position Restart your product.
If the code still appears, contact your nearest dealer.
Error_Pick Up
Roller 1. If this occurs during previewing, split your multi-page
document to smaller batches and try again.
2. If this occurs during scanning, the pick up roller may
not work properly. Contact your nearest dealer for a
replacement.
Home sensor
error Restart your product.
If the code still appears, contact your nearest dealer.
Lamp error Restart your product.
If the code still appears, contact your nearest dealer.
ADF paper jam ADF paper jam.
Open the ADF cover and remove the paper from the ADF.
If the code still appears, contact your nearest dealer.
Lock error Scanning unit is locked.
1. Turn off your product.
2. Find the lock switch underneath the machine and unlock
the machine.
3. Restart your product.
If the code still appears, contact your nearest dealer.