Avision @V2800 - Manual (Page 135)

128
Cleaning the ADF
From time to time the pad assembly and feeding rollers may become contaminated
with ink, toner particles or paper dust. In this case the product may not feed
documents smoothly. If this occurs please follow the cleaning procedures to return
your machine to its original state.
1. Moisten a clean lintless cloth with isopropyl alcohol (95%).
2. Pull the ADF Release button.
3. Gently open the ADF front cover. Wipe the feeding rollers from side to side.
Rotate the rollers forward with your finger and repeat the above cleaning
procedures until the rollers are clean. Be careful not to snag or damage the
pick springs.
4. Wipe the black part of the ADF snap-in pad.
5. Close the ADF unit. Your machine is now ready to use.
ADF Snap-in
Pad
Feeding
Roller
ADF Release
Button
1
2
3
4