Avision @V2800 - Manual (Page 20)

13
Unlocking the Scan Unit
The scan unit is locked during transport to protect the scanning mechanism from
being damaged. Be sure to unlock the scan unit before using the machine.
1). Open the document cover.
Locate the lock switch at the
left side.
2). Move the lock switch to the
“unlocked position”.
Note:
If you need to move the product for repair or any other reason, be sure to
lock the product before moving. To lock the product, please do the
following,
1. Turn off the product.
2. If the scan unit is not located at the front of the glass, turn on the product.
After the scan unit returns to the front end, turn off the product.
3. Move the lock switch to the “Locked Position”.
“Locked Position”
“Unlocked Position”
The scanning unit
at this position
before locking the
scanner
Document
Cover