Atec Tektronix-MSO7000 Series - Manual (Page 3)

Digital Phosphor Oscilloscopes / Digital Serial Analyzers / Mixed Signal Oscilloscopes
Quick Selection Guide
Model Analog Bandwidth Analog Sample Rate
4 Channels
Standard Memory –
Analog + Digital
Analog Channels Logic Channels
DPO70404B 4 GHz 25 GS/s 10 MS 4
DSA70404B 4 GHz 25 GS/s 20 MS 4
MSO70404 4 GHz 25 GS/s 10 MS 4 16
DPO70604B 6 GHz 25 GS/s 10 MS 4
DSA70604B 6 GHz 25 GS/s 20 MS 4
MSO70604 6 GHz 25 GS/s 10 MS 4 16
DPO70804B 8 GHz 25 GS/s 10 MS 4
DSA70804B 8 GHz 25 GS/s 20 MS 4
MSO70804 8 GHz 25 GS/s 10 MS 4 16
DPO71254B 12.5 GHz 50 GS/s 10 MS 4
DSA71254B 12.5 GHz 50 GS/s 20 MS 4
MSO71254 12.5 GHz 50 GS/s 10 MS 4 16
DPO71604B 16 GHz 50 GS/s 10 MS 4
DSA71604B 16 GHz 50 GS/s 20 MS 4
MSO71604 16 GHz 50 GS/s 10 MS 4 16
DPO72004B 20 GHz 50 GS/s 10 MS 4
DSA72004B 20 GHz 50 GS/s 20 MS 4
MSO72004 20 GHz 50 GS/s 10 MS 4 16
System Turn-on and Verification
From the time a design is first powered up through the initial operational
checks, the DPO/DSA70000B and MSO70000 Series provide the features
you need.
Uncompromised Four Channel Acquisition
With the industry’s lowest noise and up to 50 GS/s sample rate on all four
channels the DPO70000B Series ensures that signal integrity checks
and timing analysis can be done without worrying about noise and jitter
in the scope distorting the measurements. Single shot bandwidths up
to 20 GHz on all four channels ensure that you’ll capture your signals of
interest without worrying about undersampling when using more than 1 or
2 channels.
16 Channel Digital Acquisition (MSO70000 only)
When you have many interfaces to verify, the MSO70000 Series with 4
analog and 16 logic channels enables efficient channel-to-channel timing
checks. With timing resolution of 80 ps, the MSO70000’s digital acquisition
system enables you to make precise timing measurements on as many as
20 channels simultaneously.
iCapture – One Connection for Analog and Digital
(MSO70000 only)
The number of signals that must be verified can often make the checkout
of a design long and involved. By using the iCapture digital-to-analog
multiplexer feature, you can easily verify the analog characteristics of any
of the 16 signals connected to the MSO70000 Series’ digital channels.
Using iCapture, you can quickly view the analog characteristics of any input
channel. If the signal is working as expected, relegate it to a digital-only
view and continue testing other lines.
www.tektronix.com 3