Atec Tektronix-MSO7000 Series - Manual (Page 20)

Data Sheet
Display, Computer, I/O
Display
Characteristic Description
Color Palettes Normal, Green, Gray, Temperature, Spectral, and
User-defined
Display Format YT, XY
Display Resolution XGA 1024 horizontal × 768 vertical pixels
Display Size Diagonal: 307.3 mm (12.1 in.)
Display Type Liquid crystal active-matrix color display
Horizontal Divisions 10
Vertical Divisions 10
Waveform Styles Vectors, Dots, Variable Persistance, Infinite Persistance
Computer System and Peripherals
Characteristic DPO/DSA Models MSO Models
Operating System Microsoft Windows XP Embedded
CPU Intel Pentium 4 Processor,
3.4 GHz
Intel Core 2 Duo
Processor, 3 GHz
PC System Memory 2 GB 4 GB
Hard Disk Drive Rear-panel, removable hard disk drive,
160 GB capacity
CD-R/W Drive Front-panel CD-R/W drive with CD creation
software application
DVD Drive Read only
Mouse Optical wheel mouse, USB interface
Keyboard USB interface
Input/Output Ports
Front Panel
Port DPO/DSA Models MSO Models
AUX Trigger Input See trigger specifications
DC Probe Calibration
Output
BNC connector, ±10 VDC for DC probe calibration
(Signal available only during probe calibration)
Fast Edge Output SMA connector provides fast edge signal. 1 kHz
±20%; 810 mV (base to top) ±20% into ≥10 kΩ
load; 440 mV ±20% into a 50 Ω load
Recovered Clock SMA connector, ≤1.25 Gb/s, Output swing ≥130 mV
p-p
into 50 Ω at 1.25 Gb/s. Requires Option PTH
or Option MTH to enable on DPO70000B and
MSO70000, standard on DSA70000B
Recovered Data SMA connector, ≤1.25 Gb/s, Output swing of
1010 repeating pattern 200 mV into 50 Ω at
1.25 Gb/s. Requires Option PTH or Option
MTH to enable on DPO70000B and MSO70000,
standard on DSA70000B
USB 2.0 Port Allows connection of USB keyboard, mouse,
or storage device
Rear Panel
Port DPO/DSA Models MSO Models
Audio Ports Miniature phone jacks for stereo microphone
input and stereo line output
AUX Trigger Output BNC connector, 0 to 3 V; default output is
A-Event Trigger low true
External Time Base
Reference In
BNC connector; allows time base system to phase
lock to external 10/100 MHz reference. Optimized
(by using a software switch) for either a highly
stable clock or tracking mode
GPIB Port IEEE 488.2 standard
Keyboard Port PS/2 compatible
LAN Port RJ-45 connector, supports 10Base-T, 100Base-T,
and 1000Base-T
Mouse Port PS/2 compatible
Parallel Port IEEE 1284, DB-25
connector
N/A
eSATA port N/A External SATA interface
for eSATA storage devices
Power 100 to 240 V
RMS
, ±10%, 50/60 Hz; 115 V
RMS
±10%,
<870 W, 400 Hz; CAT II, <1100 VA typical
External Video Ports Connect to show the oscilloscope display, including
live waveforms on an external monitor or projector.
The primary Windows desktop can also be displayed
on an external monitor using these ports
Scope XGA Video Port 15 pin D-sub connector
on the rear panel, video is
IBM XGA compatible
N/A
DVI-I Video Port N/A DVI connector, female.
DVI to VGA 15 pin
D-sub connector adapter
provided
Serial Port DB-9 COM1 port Two DB-9 COM1 ports
TekLink™ Synchronizes multiple Tektronix oscilloscopes
together to allow simultaneous acquisition of
more than four channels
Time Base Reference Out BNC connector; provides TTL-compatible output
of internal 10 MHz reference oscillator
USB 2.0 Ports Four. Allow connection of USB keyboard,
mouse, or storage device
Windows Video Port 15 pin D-sub connector on
the rear panel; connects
a second monitor to use
dual-monitor display
mode allowing analysis
results and plots to be
viewed along with the
oscilloscope display.
Video is DDC2B compliant
N/A
20 www.tektronix.com