Atec Tektronix-MSO7000 Series - Manual (Page 10)

Data Sheet
SignalVu™ Vector Signal Analysis – Easily verify wide-bandwidth designs such
as wideband radar, high data rate satellite links, or frequency-hopping radios and
characterize wideband spectral events. SignalVu combines the functionality of a vector
signal analyzer, a spectrum analyzer, and the powerful triggering capabilities of the
DPO/DSA70000B and MSO70000 – all in a single package.
DSA70000B – A Dedicated Solution Configured for
Today’s High-speed Serial Design Challenges
The DSA70000B Digital Serial Analyzer is specially configured to address
high-speed serial data designs by encapsulating many of the serial domain
features needed for high-speed serial verification and characterization.
These standard features on the DSA70000B Series are options on the
DPO70000B and MSO70000 Series.
Serial Pattern Triggering – Real-time serial pattern triggering and protocol
decode with built-in clock recovery recovers the clock signal, identifies the
transitions, and decodes characters and other protocol data. You can see
the 8b/10b bit sequences decoded into their words for convenient analysis,
or you can set the desired encoded words for the serial pattern trigger to
capture. With Pattern Lock Triggering, the DSA70000B can synchronize
to long serial test patterns up to 6.25 Gb/s and remove random jitter. The
DSA70000B Series covers serial standards up to 3.125 Gb/s with an option
to support up to 5 Gb/s (Option STU).
DPOJET Jitter, Timing, and Eye-diagram Analysis – The DSA70000B
Series features the highest-accuracy jitter and timing measurements as well
as comprehensive analysis algorithms. Tight timing margins demand stable,
low-jitter designs. You can make jitter measurements over contiguous
clock cycles on every valid pulse in a single-shot acquisition. Multiple
measurements and trend plots quickly show system timing under variable
conditions, including Random and Deterministic Jitter separation.
Communications Mask Testing
Communications Mask Testing – Provides a complete portfolio of masks
for verifying compliance to serial communications standards. 156 masks
for the following standards are supported – PCI Express, ITU-T/ANSI
T1.102, Ethernet IEEE 802.3, ANSI X3.263, Sonet/SDH, Fibre Channel,
InfiniBand, USB, Serial ATA, Serial Attached SCSI, IEEE 1394b, RapidIO,
OIF Standards.
20 MS Record Length – 20 MS on all four channels provides a longer time
sequence at high resolution. Optional record lengths up to 125 MS for the 4,
6, and 8 GHz models, 250 MS for the 12.5, 16 and 20 GHz models extend
the acquisition time sequence.
Advanced Event Search and Mark – Finding important events such as
fast or slow transitions, setup and hold violations, or logic patterns within a
long-duration capture is made easy with the pattern matching and software
triggering functionality of Event Search and Mark.
With standard features that extend the functionality of the Tektronix
DPO70000B Series to address high-speed serial signal analysis and
certification, the DSA70000B Series offers a specialized instrument that
efficiently addresses your design challenges.
DSA Feature Set in the MSO70000
If you need to combine the functionality of the DSA70000B and the
MSO70000, the DSA options for the MSO70000 provide the DSA’s
high-speed serial test features in an MSO (see Option DSAH or DSAU in
the Ordering Information section below).
User-selectable Bandwidth Limit Filters
While wide bandwidth is needed to characterize your high-speed serial
designs, certification testing can require a specific instrument bandwidth
appropriate for the signal’s data rate in order to correlate test results
between different test labs. The DPO/DSA70000B and MSO70000 Series
feature user-selectable bandwidth limiting filters. Using these bandwidth
limit filters which range from 500 MHz to 19 GHz, you will ensure that
your measurement is done using the bandwidth specified by the industry
standard.
10 www.tektronix.com