Atec Tektronix-TDS7000B Series - Manual (Page 5)

Digital Phosphor Oscilloscopes • www.tektronix.com/oscilloscopes 5
Digital Phosphor Oscilloscopes
TDS7000B Series
Acquisition Modes
TDS7054/TDS7104 TDS7154B/TDS7254B/
TDS7404B/TDS7704B
FastAcq Acquisition Powered by exclusive DPX ® acquisition technology, FastAcq optimizes the instrument
for analysis of dynamic signals and capture of infrequent events
Maximum FastAcq Waveform Capture Rate >200,000 wfms/sec >400,000 wfms/sec
Waveform Database Accumulate Waveform Database providing three-dimensional array of amplitude, time and counts
Sample Acquire sampled values
Peak Detect Captures narrow glitches at all real-time sampling rates
Minimum Peak Detect Pulse Width ≤1 ns 400 ps
Averaging From 2 to 10,000 waveforms included in average
Envelope From 2 to 2x10 9 waveforms included in min-max envelope
Hi-Res Real-time boxcar averaging reduces random noise and increases resolution
FastFrame ™ Acquisition Acquisition memory divided into segments; maximum trigger rate >265,000 waveforms per second.
Time of arrival recorded with each event
Trigger System
TDS7054 TDS7104 TDS7154B/TDS7254B/
TDS7404B/TDS7704B
Sensitivity
Internal DC Coupled 0.35 div DC to 50 MHz 0.35 div DC to 50 MHz 0.5 div DC to 50 MHz
increasing to 1 div at 500 MHz increasing to 1 div at 1 GHz increasing to 1.5 div at 3 GHz
TDS7404B/TDS7704B:
2.7 div at 4 GHz (typical)
External (Auxiliary Input) 400 mV from DC to 50 MHz 250mV from DC to 50 MHz 150 mV from DC to 50 MHz
increasing to 750 mV at 100 MHz increasing to 500mV at 100 MHz increasing to 500 mV at 2.5 GHz
Main Trigger Modes Auto, Normal and Single
Trigger Sequences Main, Delayed by Time, Delayed by Events. All sequences can include separate
horizontal delay after the trigger event to position the acquisition window in time
Trigger Characteristics
Standard Trigger Types Edge, Glitch, Runt, Width, Transition Time, Edge, Glitch, Runt, Width, Transition
Timeout, Pattern, State, Setup/Hold Time, Timeout, Pattern, State, Setup/
Hold, Window - all except Edge, Pattern,
and State can be logic qualified
Communications-related Triggers Support for AMI, HDB3, BnZS, CMI, MLT3 and NRZ encoded communications signals.
(requires Option SM) Select among isolated positive or negative one, zero pulse form or eye patterns as applicable to standard
Serial Pattern Trigger 64-Bit serial word recognizer, bits specified in binary (high, low, don’t care)
(requires Option ST) or hex format. Trigger on NRZ-encoded data up to 1.25 GBaud
Trigger Level Range
Internal ±12 divisions from center of screen
External (Auxiliary In) ±8 V ±5 V
Line fixed at 0 V
Trigger Coupling DC, AC (attenuates <60 Hz), HF Rej (attenuates >30 kHz), LF Rej (attenuates <80 kHz), Noise Reject (reduces sensitivity)
Trigger Holdoff Range 250 ns minimum to 12 s maximum