Atec Tektronix-TDS7000B Series - Manual (Page 3)

Digital Phosphor Oscilloscopes
TDS7000B Series
Digital Phosphor Oscilloscopes • www.tektronix.com/oscilloscopes 3
Vertical System
TDS7054 TDS7104 TDS7154B TDS7254B TDS7404B TDS7704B
Input Channels 4 4 4 4 4 4
Hardware Analog 500 MHz 1 GHz 1.5 GHz *1 2.5 GHz *1 4 GHz *1 7.25 GHz *1
Bandwidth (–3 dB) (typical), 7GHz *1
guaranteed
Rise Time 10% 800 ps 400 ps 200 ps 130 ps 100 ps 62 ps
to 90% (typical)
Rise Time 20% 135 ps 83 ps 72 ps 43 ps
to 80% (typical)
DC Gain Accuracy 1% ±(2% + ±2.5% +
(2% x offset) (2% x offset)
Hardware Bandwidth 250 MHz or 20 MHz Requires TCA-1 MEG
Limits
Input Coupling AC, DC, GND DC, GND
Input Impedance 1 M Ω ±0.5% or 50 Ω ±1% 50 Ω ±2.5%
Input Sensitivity, 1 M Ω 1 mV/div to 10 V/div —
Input Sensitivity, 50 Ω 1 mV/div to 1 V/div 2 mV/div to 1 V/div
Vertical Resolution 8-Bit (>11-Bit with averaging) 8-Bit (>11-Bit with averaging)
Max Input Voltage, ±150 V CAT I Derate at 20 dB/decade —
1 M Ω to 9 V
RMS
above 200 kHz
Max Input Voltage, 5 V
RMS
, with peaks less than ±30 Volts <1 V
RMS
for <100 mV/div, <5 V
RMS
for ≥100 mV/div settings
50 Ω Also determined by TekConnect ® accessory
Offset Range 1 mV/div to 100 mV/div: ±1 V 2 mV to 50 mV/div: ±0.5 V
101 mV/div to 1 V/div: ±10 V 50.5 mV to 99.5 mV: ±0.25 V
1.01 V/div to 10 V/div: ±100 V 100 mV to 500 mV: ±5 V
505 mV to 1 V/div: ±2.5 V
Channel-to-Channel ≥100:1 at 100 MHz and ≥80:1 at 1.5 GHz and
Isolation Any Two ≥30:1 at the rated bandwidth ≥15:1 at the rated bandwidth
Channels at Equal
Vertical Scale Settings
≥ ≥≥ ≥
*1 At ≥10 mV/div.
Note: Typical system bandwidth of TDS7404B with P7240: 4 GHz.
Note: Typical system bandwidth of TDS7404B with P7330: 3.5 GHz.
Note: Typical system bandwidth of TDS7704B with P7260: 6 GHz.
Note: Typical system bandwidth of TDS7704B with P7350: 5 GHz.
Note: Typical system bandwidth of TDS7704B with P7380: 7 GHz.
Characteristics