Atec Rohde-Schwarz-SMIQ Series - Manual (Page 7)

Vector Signal Generator R&S SMIQ – Specifications 7
Phase modulation with option R&S SM-B5 13 )
Max. deviation with I/Q modulation
0.3 MHz to 750 MHz
>750 MHz to 1200 MHz
>1200 MHz to 3300 MHz
>3300 MHz to 6400 MHz
2 MHz
1 MHz
2 MHz
4 MHz
Resolution <1%, min. 10 Hz
Setting error at AF = 1 kHz <(3% of setting + 20 Hz)
FM distortion at AF = 1 kHz
and half maximum deviation
<0.5%
Modulation frequency range
with maximum deviation
at
<25% of maximum deviation
DC to 500 kHz
DC to 2 MHz
Modulation frequency response
10 Hz to 100 kHz
10 Hz to 2 MHz <0.5 dB
<3 dB
Incidental AM at 40 kHz deviation,
AF = 1 kHz, carrier frequency
>5 MHz <0.1%
Carrier frequency offset with FM <0.01% of maximum deviation
+1% of selected deviation
EXT1, EXT2 modulation inputs
Input impedance
Input voltage for selected modulation depth
High/low indication (10 Hz to 100 kHz) >100 kΩ
1 V peak
for inaccuracy
>3%
Modes internal, external AC/DC, two-tone with two modulation
channels PM1 and PM2
Max. deviation without I/Q modulation
0.3 MHz to 450 MHz
>450 MHz to 750 MHz
>750 MHz to 1500 MHz
>1500 MHz to 3300 MHz
>3300 MHz to 6400 MHz
Max. deviation with I/Q modulation
0.3 MHz to 750 MHz
>750 MHz to 1200 MHz
>1200 MHz to 3300 MHz
>3300 MHz to 6400 MHz
20 rad
5 rad
10 rad
20 rad
40 rad
20 rad
10 rad
20 rad
40 rad
Resolution <1%, min. 0.001 rad
Setting error at AF = 1 kHz <3% of reading + 0.01 rad
Distortion at AF = 1 kHz and half maximum deviation <1%
Modulation frequency range DC to 100 kHz
Modulation frequency response
10 Hz to 100 kHz <0.8 dB
EXT1, EXT2 modulation inputs
Input impedance
Input voltage for selected modulation depth
High/low indication (10 Hz to 100 kHz) >100 kΩ
1 V peak
for inaccuracy
>3%