Atec Rohde-Schwarz-SMIQ Series - Manual (Page 19)

Vector Signal Generator R&S SMIQ – Specifications 19
DPDCH
Overall symbol rate
Active DPDCHs
Symbol rate
Channelization code
Channel power
User data
Dedicated Physical Data Channel
overall data rate of all uplink DPDCHs
15, 30, 60, 120, 240, 480, 960, 2 x 960, 3 x 960, 4 x 960,
5 x 960, 6 x 960 ksps
1 to 6, depending on overall symbol rate
fixed for active DPDCHs, depending on overall symbol rate
fixed for active DPDCHs, depending on overall symbol rate
–60 dB to 0 dB for all DPDCHs
PRBS: PN9, PN11, PN15, PN16
all 0, all 1 and bit pattern (max. 24 bit long)
Parameters for each base station (BS)
State OFF/ON
2nd search code group 0 to 63 (depending on scrambling code)
Scrambling code 0 to 5FFFF hex or off
TFCI state OFF/ON
TFCI 0 to 1023
TPC pattern readout mode use of TPC pattern:
continuous, single + all 0, single + all 1, single + alternating 01,
single + alternating 10
Use TPC for dynamic output power control OFF/ON
if this function is active, the TPC pattern is used to vary the transmit
power of the code channels versus time
Output power control step –10 dB to +10 dB
Transmit diversity OFF/antenna 1/antenna 2
if this function is active, the output signal for antenna 1 or
antenna 2 can be generated as defined in the standard
Parameter for each mobile station (MS)
State OFF/ON
Mode PRACH only, PCPCH only, DPCCH + DPDCHs
Scrambling code 0 to FF FFFF hex
Scrambling code mode long, short, off
TPC pattern all 0, all 1 and bit pattern (max. 24 bit long)
TPC pattern readout mode use of TPC pattern:
continuous, single + all 0, single + all 1, single + alternating 01,
single + alternating 10
Parameters for each downlink code channel, independently selectable
State OFF/ON
Symbol rate between 7.5 ksps and 960 ksps, depending on type of physical
channel
Channelization code range 0 to max. 511, depending on symbol rate and type of
physical channel
Power –60 dB to 0 dB
User data PRBS: PN9, PN11, PN15, PN16
all 0, all 1 and bit pattern (max. 24 bit long)
Timing offset separately adjustable for each code channel
0 to 150 (in units of 256 chips)
Pilot length 2, 4, 8, 16 bit depending on symbol rate
TPC pattern all 0, all 1 and bit pattern (max. 24 bit long)
Multicode state OFF/ON