Atec Kikusui-PCR500L - Manual (Page 9)

Page9 Copyright © 2002 KIKUSUI ELECTRONICS CORP. All rights reserved. http://www.kikusui.co.jp/
(*1) Input range of 100V or 200V can be selected with a switch.
(*2) At an output voltage of 100V or 200V, output current rated value, load
power factor of 1 and output frequency of 40 to 999.9 Hz.
(*3) 100V or 200V range can be selected with switch on the front panel. Setting
resolution:0.1V
(*4) At an output voltage of 1 to 100V/2 to 200V and load power factor of 0.8
to 1 (AC mode).
At an output voltage of 100 to 150V or 200 to 300V (AC mode) as well
as at an output voltage of 100 to 212V or 200 to 424V (DC mode), the
output current is reduced in accordance with the output voltage.
At a load power factor or 0 to 0.8, the output current is reduced in
accordance with the load power factor (AC mode).
At an output frequency of 1 to 40 Hz, the output current is reduced in
accordance with the output frequency (AC mode).
(*5) For condenser input type rectified loads (restricted by the RMS value of
the rated output current).
(*6) Resolution: 1) 0.01 Hz (1.00 to 99.99 Hz)
2) 0.1 Hz (100.0 to 999.9 Hz)
(*7) At an output voltage of 80 to 150 V or 160 to 300V, a frequency of 10 to
999.9 Hz and a load power factor of 1.
(*8) Voltmeter, Ammeter : Effective in 40 to 999.9Hz at output setting.
Power Meter: Effective in 45 to 65Hz at output setting.
(*9) For true rms value display or waveform with a crest factor of 3 or less.
Model PCR500L PCR1000L PCR2000L PCR4000L PCR6000L
Input Ratings (RMS Values)
Voltage 85 to 132V / 170 to 250V (100V or 200V range) (*1) 170V to 250V
No. of phase, Frequency 1
φ
, 47Hz to 63Hz
Apparent Electrical Power Approx. 1kVA Approx. 2kVA Approx. 4kVA Approx. 8kVA Approx. 12kVA
Power Factor 0.95 typical (*2)
Current (100V or 200V range) 12A / 6A or less 24A / 12A or less 48A/24A or less 96A/48A or less 72A or less
Output Ratings - AC Mode (RMS Values)
Voltage 1 to 150V/2 to 300V (100V or 200V range) (*3)
Max. Current (*4) 5A/2.5A 10A/5A 20A/10A 40A/20A 60A/30A
No. of Phases 1
φ
Power Capacity 500VA 1kVA 2kVA 4kVA 6kVA
Max. Peak Current (*5) 4 times max. current (RMS value)
Load Power Factor 0 to 1 (advanced or delayed phase) (*4)
Frequency 1 to 999.9Hz(*4,6)
Output Voltage Waveform Distortion (*7) Max.0.3%
Output Ratings - DC Mode
Voltage 1.4 to 212V/2.8 to 424V (*4)
Max. Current 2.5/1.25A 5A/2.5A 10A/5A 20A/10A 30A/15A
Power Capacity 250VA 500VA 1kVA 2kVA 3kVA
Voltmeter (RMS, PEAK,AVE) (*8, 9)
Indicators (Display Mode) Ammeter (RMS, PEAK, AVE) (*8, 9)
Power Meter, Frequency Meter (*9)
Circuitry Linear amp type
Dimensions
Main Unit (W
×
H
×
D mm) 430
Ч
217
Ч
550 430
Ч
351
Ч
550 430
Ч
484
Ч
550 430
Ч
839
Ч
550 430
Ч
1105
Ч
550
Max. Projections (W
×
H
×
D mm) 450
Ч
245
Ч
595 450
Ч
415
Ч
595 450
Ч
545
Ч
595 450
Ч
920
Ч
595 450
Ч
1190
Ч
595
Weight Approx. 25kg Approx. 49kg Approx. 69kg Approx.120kg Approx. 160kg
Input/Output Terminal Board Connection Screws
Input Terminal Board M4 M6 M6 M6 M6
Output Terminal Board M4 M6 M6 M6 M6
0 to + 50
°
C/10 to 90% RH (no condensation of dew)
Operating Temperature and
Humidity Ranges
AC mode DC Mode
Output Voltage Ratio (%) Output Voltage Ratio (%)
100
80
60
40
20
0
0 20 40 60 80 100 120 140 150
Output Current Ratio(%) Output Current Ratio(%)
100
80
60
40
20
0
0 40 80 120 160 220 200
Load Power Factor Output Frequency (Hz)
100
80
60
40
20
0
1 0.8 0.6 0.4 0.2 0
Output Current Ratio (%) Output Current Ratio (%)
100
80
60
40
20
0
1 10 20 30 40 50 999.9
■ Output Voltage Ratio - Rated Output Current Characteristics
■ Load Power Factor
- Rated Output Current
Characteristics ■ Output Frequency
- Rated Output Current
Characteristics
Specifications
PCR-L series
MULTI PURPOSE AC POWER SUPPLY (CV·CF)