Atec Chroma-62000P Series - Manual

Programmable
DC Power Supply
Chroma's new 62000P Series of programmable DC
power supplies offer many unique advantages
for ATE integration and testing. These advantage
include a constant power operating envelope,
precision readback of output current and voltage,
output trigger signals as well as the ability to
create complex DC transients waveforms to
test device behavior to spikes, drops, and other
voltage deviations.Designed for automated
testing DC-DC converters and similar products,
the 62000P sets a new standard for high accuracy
programmable DC supplies.
The 62000P Series includes 12 different models
ranging from 600W to 5000W, up to 120A and up
to 600V. Due to their constant power operating
envelope a single instrument can provide both
high voltage/low current AND low voltage/high
current thereby reducing the number of supplies
needed in typical ATE applications.
The 62000P Series also includes 16 bit readback
capability for accurate voltage and current
readings. This means systems no longer need
complex shunt/multiplexers to make accurate
readings of the UUT's input parameters. The
instruments also include I/O ports providing 8
bit TTLs, DC-ON, fault output signal and remote
inhibit as well as a output trigger signal for system
timing measurements.
Another unique capability of the 62000P Series
supplies is their ability to create complex DC
transient waveforms. This capability allows devices
to be tested to DC voltage dropouts, spikes
and other voltage variations making them an
ideal choice for airborne device testing, inverter
testing and other devices which will experience
voltage interrupts. Applications include DC/DC
Converter & Inverter voltage drop test, engine
start-up simulation, battery automated charging,
electronic product life cycle test, and etc.
PROGRAMMABLE DC POWER SUPPLY
MODEL 62000P SERIES
MODEL 62000P SERIES
Key Features:
■ Wide range of Voltage & Current
Combinations with Constant Power
■ Voltage range : 0 ~ 600V
Current range : 0 ~ 120A
Power Range : 600W, 1200W, 2400W, 5000W
■ Digital Encoder Knobs, Keypad
and Function Keys
■ Power Factor Correction (0.95)
■ High-speed Programming
■ Precision V&I Measurements
■ Current Sharing for Parallel Operation
with Master/Slave Control
■ Voltage Ramp Function : Time Range
(10ms~99hours)
■ Auto Sequencing Programming : 10
Programs / 100 Sequences / 8 bit TTL
■ Voltage & Current Slew Rate Control
■ OVP, Current Limit, Thermal Protection
■ Remote sense, 5V Line Loss Compensation
■ APG (Analog Programmable Interface)
with Isolated Analog Interface Card
■ Optional GPIB Control with SCPI
■ Optional Ethernet/LXI interface
■ Standard RS-232 & USB Interface
■ LabView and Labwindows
■ CE Certified
PFC
Ethernet GPIB RS-232 USB