Atec EM-Test-Netwave-3-Phase Series - Manual

DATA SHEET > NetWave Series 3-phase > 20130606
NETWAVE SERIES (3-PHASE)
THREE-PHASE MULTIFUNCTIONAL AC/DC POWER SOURCES
FOR TESTS ACCORDING TO ...
> AIRBUS
> BOEING
> DO 160 Section 16
> EN 61000-3-11
> EN 61000-3-12
> EN 61000-3-2
> EN 61000-3-3
> EN 61000-4-13
> EN 61000-4-14
> EN 61000-4-17
> EN 61000-4-27
> EN 61000-4-28
> EN 61000-4-29
> IEC 61000-3-11
> IEC 61000-3-12 Ed.2:2011
> IEC 61000-3-2
> IEC 61000-3-3
> IEC 61000-4-13
> IEC 61000-4-14
> IEC 61000-4-17
> IEC 61000-4-27
> ...
NETWAVE - SIMULATION OF THE MOST REQUIRED POWER SUPPLY PHENOMENON
The NetWave Series (3-phase) are three-phase AC/DC power source, specifically designed to meet the requirements as per
the standards IEC/EN 61000-4-13, -4-14, -4-27(*) and -4-28. It is also used as a DC power source to cover the requirements
as per the standards IEC/EN 61000-4-17 (Ripple on DC) and IEC/EN 61000-4-29 for voltage dips and interruptions on DC
supplies. The NetWave series is well suited for testing inverters (e.g. solar power, wind power) and e-vehicles. Additionally,
the NetWave series (3-phase) offers the necessary capabilities for avionics testing as per DO-160, Airbus ABD0100 and
Boeing as well as per MIL-STD-704.
Optionally the NetWave 3-phase series can be equipped with a power-recovery module to absorb fed-back power (AC/DC) up
to nominal power of the NetWave. (*) pre-compliant
HIGHLIGHTS
> Wide Power Bandwidth; DC - 5kHz
> Output Power up to 60,000VA AC / 72,000W DC
> Output Voltage up to 3*360V AC (p-n), +/-500V DC
> High Inrush Current Capability
> Power-recovery up to nominal power (optional)
APPLICATION AREAS
INDUSTRY
MEDICAL
RESIDENTIAL
AVIONICS
MILITARY
RENEWABLE ENERGY
www.emtest.com © EM TEST > PAGE 1/6