Atec Mitutoyo-SJ-410 - Manual (Page 7)

7
The tester includes X- and Y-axes micrometer
heads. This makes axis alignment much
easier because the tilt adjustment center is
the same as the rotation center of the table.
(Code No.178-042-1/178-043-1)
This table helps make the alignment adjustments required when measuring cylindrical surfaces. The corrections for the pitch angle and the swivel angle
are determined from a preliminary measurement and the Digimatic micrometers are adjusted accordingly. A flat-surfaced workpiece can also be leveled
with this table.
The levelling table can be used to align the surface to be tested with the detector reference plane. The operator is guided through the procedure by
screen prompts.
XY leveling tables Precision vise
Cylinder attachment Reference step specimen
3-axis Adjustment Table: 178-047
Patent registered in Japan, U.S.A.. Patent pending in Germany
DAT Function for the optional leveling table
Patent registered in Japan, U.S.A.. Patent pending in Germany
Aligned Not aligned
Axial line
End point
Axial line
End point
Start point
Start point
Recorded profiles
Traverse direction Traverse direction
DAT screen guides the
user when leveling
Digimatic micrometer
head
Amount of micrometer
head adjustment required
Leveling table (DAT)
(Option)
No.178-048
Inclination adjustment angle: ±1.5°
Table dimensions: 130×100mm
Maximum load: 15kg
7
4
3
13
• Fits on the stand.
This block can be positioned on top of
cylindrical objects to perform measurements.
No.12AAB358
Diameter: ø15~60mm
Configuration:
•Cylindrical measurement block
•Auxiliary block
•Clamp
Used to calibrate detector sensitivity.
No.178-611
Step nominal values: 2µm/10µm
• T-groove dimensions
• Movement is in X- and Y-axes only.
Order No.
178-042-1(mm)
178-052-1(inch)
*with digital heads
178-043-1(mm)
178-053-1(inch)
*with analog heads
178-049(mm)
178-058(inch/mm)
*with digital heads
Table dimensions 130×100mm
Maximum load 15kg
Inclination adjustment angle ±1.5° —
Swiveling angle ±3° —
X/Y-axis travel range ±12.5mm ±12.5mm ±12.5mm
Resolution 0.001mm 0.01mm 0.001mm
Dimensions (WxDxH) 262Ч233Ч83mm 220Ч189Ч83mm 262Ч233Ч55mm
Mass 6.3kg 6kg 5kg
Order No. 178-019
Clamping method Sliding jaws
Jaw opening 36mm
Jaw width 44mm
Jaw depth 16mm
Height 38mm
Application
178-042-1 178-049
Unit: mm
*Drive unit not included.