Atec Mitutoyo-SJ-410 - Manual (Page 3)

3
Memory card (optional) is supported
The measurement conditions and data can be stored in a memory card
(optional) and recalled as required. This enables batch analysis and
printout of data after on-site measurement.
•Measurement condition
Internal memory: 10 sets
Memory card: 500 sets
•Measurement result
Memory card: 1000 sets
A variety of interfaces supplied as standard
The external device interfaces that come as standard include USB, RS-
232C, SPC output and footswitch I/F.
Access to functions can be restricted by a password
A pre-registered password can limit use of measurement conditions
and other settings to the tester’s administrator.
The unit is easily transported in a dedicated carrying case
which includes holders for the accessories as well as the
tester itself. (Standard accessory.)
Interfaces Data storage
Password protection
Carrying case
→
High-speed printer prints out measurement results on site
A high-quality, high-speed thermal printer prints out measurement results.
It can also print a BAC curve or an ADC curve as well as calculated
results and assessed profiles. These results and profiles are printed out
in landscape format, just as they appear on the color-graphic LCD.
Printer
A sturdy key-sheet-button panel with superior durability in any en-
vironment is provided. For repeat measurement of the same work,
simply pressing the start switch can complete measurement,
analysis and printout.
Key-sheet buttons
Sur f test
SJ-4 1 0