Atec Noiseken-ESS-200AX - Manual (Page 9)

Electrostatic Discharge Simulator
7
TC-815R
OPTIONAL ACCESSORIES
■
Free Arm Gun Stand
Model: 03-00022B •
Dimensions: W180×H760×D70mm
Weight: Approx. 5kg
Gun Stand
Model: PS-806 •
Dimensions: H300mm
Diameter: 160mm
Weight: Approx. 1.6kg
Fast Rise Time Adapter
Model: 12-00005A •
Enables a fast rise time.
Approx. 200ps(150ps ∼ 300ps)
Impulsive Magnetic Field Adapter Model: 03-00030B
Impulsive Electric Field Adapter Model: 03-00031B
Simulations of the electric and magnetic fi elds produced by an electrostatic discharge can be separately performaed by the Impulsive
Magnetic Field Adaptor and Impulsive Electric Field Adaptor. These adaptors are designed to connect to the Discharge Gun TC-815R. •
•
Parameters Specifi cations
Current limiting resistor 15Ω
Parameters Specifi cations
Discharge resistance 1.5kΩ
Electrode for generating electric fi eld 80 mm in diameter
Maximum voltage applied 30kV
OTHER OPTIONAL ACCESSORY
■
Loading Resistor(Current Detector)
Model: 06-00001A •
The Loading Resistor (Model: 06-00001A) is used to check,
verify and calibrate the output waveforms of an electrostatic
simulator for conducting an electrostatic discharge immunity
test conforming to IEC61000-4-2.
Parameters Specifi cations
Applied voltage 15kV max
Output impedance 50Ω
Conversion ratio
1V/1A(50Ω termination)
2V/1A(Open)
Output connector N-R type
Dimensions 70φ ×39mm
ISO Standard Discharge Adaptor
MODEL: 03-00050A •
ISO Standard Discharge Adaptor 03-00050A
is an additional gun head. The TC-815R
gun with this option attached in place of the
original gun head can obtain completely
identical characteristics to the TC-815ISO to
perform ESD immunity tests in compliance
with ISO10605:2001. The relevant capacitor
units and resistors are also required.
8-ø3.2PCш60
70ш
(38)
Back drawing Elevation
51Ωx25 240Ωx5
Coaxial connector (NR)