Atec Noiseken-ESS-200AX - Manual (Page 5)

Electrostatic Discharge Simulator
3
ESS-2000AX
ESS-2000AX Specifi cations
■
Item Specifi cations
Output polarity Positive or negative
Output voltage
0.20kV ∼ 30.0kV± 5% (30.5kV max)
0.20kV ∼ 10.0kV: 0.01kV step, 10.0kV ∼ 30.0kV:0.1kV step
Discharge interval
Normal mode: 0.05s ∼ 600.0s± 10%
Extra mode : 1.00s ∼ 600.0s± 10%
0.05s ∼ 9.99s: 0.01s step, 10s ∼ 600.0s: 0.1s step
No. of times of discharge 1 ∼ 60,000 times preset on the counter or continuous
Discharge mode Air/contact discharge
Radiation level Normal/Extra mode
Trigger mode Gun trigger/main unit trigger/ external trigger
Operation mode
IEC standard
Contact discharge: 2.0kV, 4.0kV, 6.0kV, 8.0kV (4 voltages preset)
Air discharge: 2.0kV, 4.0kV, 8.0kV, 15.0kV (4 voltages preset)
Manual
Contact/Air discharge: 0.20kV ∼ 30.0kV
Sweep (automatic voltage ramping) available
Up to 99 units (test settings) storable
Sequence
Seamless run of the selected test sequence (made of any combinaiton of 99 units
in Manual mode)
No. of units per one test sequence: up to 30 units
No. of test sequnences: up to 20
Warning lamp
Lights up while the HV circuitry is on.
Blinks while discharges are in progress
Discharge gun TC-815R
Charging resistance 10MΩ(53 MΩ for combination with TC-815R discharge gun)
AUX connector
D-SUB15 pin, female connector
Warning lamp (optional) connection
Automatic ESD Eliminator (optional) connection,
External interlock input
External trigger input
Optical communication connector Optic RS-232C for PC communication
Power supply 100 ∼ 240V AC 50/60 Hz ± 10%
Power consumption 75VA
Operating temperature and humidity +15 ∼ +35℃ , 25 ∼ 75% (no condensation)
Character display English or Japanese
Dimensions and Weight 260 (W) X 230 (H) X 285 (D) mm (projection excludeded) Approx. 5.3 kg