Atec Anritsu-MG3690B - Manual (Page 6)

6
RF Output
Power level specifications apply at 25 ±10˚C.
Maximum Leveled Output Power***:
* ≤2.2 GHz with Option 4
** >2.2 GHz with Option 4
*** For output power with Option 22, 0.1 Hz to 10 MHz coverage, derate all specifications by 2 dB
**** Typical 60 to 67 GHz
Model Number Configuration
Frequency Range
(GHz)
Output Power
(dBm)
Output Power
With Step
Attenuator (dBm)
Output Power
With Electronic
Step Attenuator (dBm)
MG3691B
w/opt 4 or 5
STD
< 2* GHz
≥ 2** to ≤10 GHz
+19.0
+19.0
+18.0
+18.0
+15.0
+13.0
MG3692B
w/opt 4 or 5
STD
STD
< 2* GHz
≥ 2** to ≤10 GHz
> 10 to ≤20 GHz
+19.0
+19.0
+17.0
+18.0
+18.0
+15.0
Not Available
MG3693B
w/opt 4 or 5
STD
STD
STD
< 2* GHz
≥ 2** to ≤10 GHz
>10 to ≤20 GHz
>20 to ≤30 GHz
+15.0
+15.0
+12.0
+6.0
+14.0
+14.0
+10.0
+3.0
Not Available
MG3694B
w/opt 4 or 5
STD
STD
STD
< 2* GHz
≥ 2** to ≤10 GHz
>10 to ≤20 GHz
>20 to ≤40 GHz
+15.0
+15.0
+12.0
+6.0
+14.0
+14.0
+10.0
+3.0
Not Available
MG3695B
w/opt 4 or 5
STD
STD
< 2* GHz
≥2** to ≤20 GHz
>20 to ≤50 GHz
+12.0
+10.0
+3.0
+10.0
+8.0
+0.0
Not Available
MG3696B
w/opt 4 or 5
STD
STD
< 2* GHz
≥2** to ≤20 GHz
>20 to ≤67 GHz
+12.0
+10.0
+3.0
+10.0
+8.0
+0.0****
Not Available
Typical MG3690B single sideband phase noise at 10 GHz carrier.
Standard and Ultra-Low performance with Option 3.
MG3690B
SSB Phase Noise
L( f ) dBc/Hz
10 GHz
100 Hz 1 kHz 10 kHz 100 kHz 1 MHz 10 MHz
–40
–50
–60
–70
–80
–90
–100
–110
–120
–130
–140
–150
Standard
Performance
Ultra-Low
Performance
(with Option 3)
Option 30