Atec Agilent-60503B - Manual (Page 4)

5
Table 60503-1 Specifications and Supplemental Characteristics (continued)
Current Slew Rate:*
Rate # 10 A Range Step 1 A Range Step Transition Time
1 0.17 A/ms 17 A/s 8.0 ms
2 0.42 A/ms 42 A/s 3.2 ms
3 0.83 A/ms 83 A/s 1.6 ms
4 1.7 A/ms 0.17 A/ms 800
µ
s
5 4.2 A/ms 0.42 A/ms 320
µ
s
6 8.3 A/ms 0.83 A/ms 160
µ
s
7 17 A/ms 1.7 A/ms 80
µ
s
8 42 A/ms 4.2 A/ms 32
µ
s
9 83 A/ms 8.3 A/ms 20
µ
s
10 0.17 A/
µ
s 17 A/ms 20
µ
s
11 0.42 A/
µ
s 42 A/ms 16
µ
s
12 0.83 A/
µ
s 83 A/ms 16
µ
s
*AC performance specified from 3 to 240 V.
Voltage Slew Rate:
Rate # Voltage Range Step Transition Time*
1 4 V/ms 8.0 ms
2 10 V/ms 3.2 ms
3 20 V/ms 1.6 ms
4 40 V/ms 800
µ
s
5 100 V/ms 320
µ
s
6 200 V/ms 160
µ
s
7 0.4 V/
µ
s 100
µ
s
8 1 V/
µ
s 100
µ
S
9 2 V/
µ
s 100
µ
S
*Transition time based on low capacitance current source.
Resistance Slew Rate (24
Ω
range): Uses the value programmed for voltage slew rate.
Resistance Slew Rate (10 k and 50 k
Ω
ranges): Uses the value programmed for current slew rate.
Transient Current Overshoot (When programmed from 0A):
Range Transient Current Level Current Slew Rate Overshoot*
10 A 2-10 A All slew rates 0
0.5 A 0.17 A/
µ
s to 0.83 A/
µ
s 5%
0.5 A 0.17 A/ms to 42 A/ms 0
1 A 0.83 A/
µ
s 1%
1 A 0.17 A/ms to 0.17 A/
µ
s 0
1 A 0.5 A 8.3 A/ms 4%
0.5 A 0.17 A/s and 0.17 A/ms 0
1 A All slew rates 0
*All overshoot values assume a total inductance of l
µ
H, or less, in the load leads connected to the D.U.T.