Atec Agilent-7000A Series - Manual (Page 9)

CAN/LIN triggering and decode (N5424A or Option AMS on new scope purchases)
Trigger on and decode serially transmitted data based on CAN and LIN protocols. This ap-
plication not only provides triggering on complex serial signals, but it also provides unique
hardware-accelerated capabilities. Hardware-accelerated triggering and decode means the
scope stays responsive and fast
This application requires a 4-channel DSO or 4-channel MSO and can use any combination of
scope or logic acquisition channels.
For more information: www.agilent.com/find/CAN-LIN.
Trigger on and decode CAN serial packets.
Software applications
FPGA dynamic probe application (N5406A for Xilinx, N5434A for Altera)
Give your MSO internal FPGA visibility. Agilent’s MSO FPGA dynamic probe provides internal
FPGA visibility and quick instrument setup using an innovative core-assisted debug approach.
Measurement tasks that previously took hours can be done in a few mouse clicks. In a few
seconds, easily measure a different set of internal signals without changing your FPGA design.
For more information:
www.agilent.com/find/7000-altera
www.agilent.com/find/7000-xilinx
Debug and validate your FPGA designs
faster and more effectively with the FPGA
dynamic probe and an Agilent MSO.
9
On-screen serial decode of an SPI packet
FlexRay Measurements (N5432C or Option FLX on new scope purchases)
Trigger on and time-correlate FlexRay communication with physical layer signals. With
Agilent’s unique hardware-accelerated decoding, it provides the fastest decode update
rates in the industry while the scope remains responsive and fast. Also included with this
option is FlexRay eye-diagram mask testing and physical layer conformance test solution.
This application requires a 4-channel DSO or 4-channel MSO and can use any combina-
tion of scope or logic acquisition channels.
For more information: www.agilent/find/flexray
Time-correlated display of the FlexRay
physical layer signal with protocol
decoding.
Time-correlated display of the MIL-STD 1553
physical layer signal with protocol decoding.
MIL-STD 1553 Serial Trigger and Decode (N5469A or Option 553 on new scope purchase)
This application provides integrated MIL-STD 1553 serial bus triggering, hardware-based
decoding, and eye-diagram mask testing to help you debug and characterize the
electrical/physical layer of MIL-STD 1553 serial buses faster than with traditional
“bit-counting” methods.
This application requires a 4-channel DSO or 4-channel MSO and can use any combina-
tion of scope of logic acquisition channels
For more information: www.agilent.com/find/1553
I 2 S triggering and decode(Option SND or N5468A)
Find and debug intermittent errors and signal integrity problems faster on I2S audio
protocol devices. This application offers powerful triggering and our unique hardware-
accelerated decode and lister window so you can more easily find errors you could miss
using other serial bus decode tools.
This application requires a 4 channel DSO or MSO model
For more information: www.agilent.com/find/I2S