Atec Agilent-7000A Series - Manual (Page 16)

Performance characteristics
Acquisition: scope channels
Sample rate MSO/DSO701xA: 2 GSa/s each channel
MSO/DSO703xA: 2 GSa/sec each channel
MSO/DSO705xA/710xA: 4 GSa/sec half channel*, 2 GSa/sec each channel
Equivalent-time sample rate: 400 GSa/s (when real-time mode is turned off)
Memory depth 2 channels/4 channels
Standard 8 Mpts/4 Mpts
Vertical resolution 8 bits
Peak detection MSO/DSO701xA: 500-ps peak detect
MSO/DSO703xA: 500-ps peak detect
MSO/DSO705xA/710xA: 250-ps peak detect
Averaging Selectable from 2, 4, 8, 16, 32, 64 … to 65536
High resolution mode Average mode with avg = 1
12 bits of resolution when ≥10 µs/div at 4 GSa/s or ≥20-µs/div at 2 GSa/s
Filter Sinx/x interpolation (single shot BW = sample rate/4 or bandwidth of scope,
whichever is less) with vectors on and in real-time mode
Acquisition: digital channels (7000A Series MSO or MSO-upgraded 7000A Series DSO)
Sample rate 2 GSa/sec one pod**, 1 GSa/sec each pod
Maximum input frequency 250 MHz
Memory depth One pod/both pods (with scope channels turned off)
Standard 8 Mpts/4 Mpts
One pod/both pods (with scope channels turned on)
Standard 2.5 Mpts/ 1.25 Mpts
Vertical resolution 1 bit
Glitch detection 2 ns (min pulse width)
* Half channel is when one of channel 1 or 2 is turned on, and/or one of channel 3 or 4 is turned on.
** A pod is a group of eight digital channels, either 0-7 or 8-15.
16