Atec Agilent-Infiniium-9000 Series - Manual (Page 7)

7
Widest range of debug and compliance software applications: serial protocol-level
I 2 C/SPI serial trigger and decode (N5391B or Option 007 on new scope purchases)
This application displays real-time time-aligned decode of I
2 C and SPI serial buses. Hardware-based
triggering means triggering reliably, even on the most infrequent events.
This application works on all models and can use any combination of scope or logic acquisition
channels.
For more information: www.agilent.com/find/9000_I2C-SPI
RS-232/UART serial decode and trigger (N5462B or Option 001 on new scope purchases)
This application eliminates the need to manually decode bus trafic. Using data captured on the
scope or logic channels, the application lets you easily view the information sent over an RS-232
RS-422, RS-485 or other UART serial buses.
Display real-time time-aligned decode of transmit and receive lines. Hardware-based triggering
means triggering reliably, even on the most infrequent events.
This application works on all models and can use any combination of the scope or logic acquisition
channels.
For more information: www.agilent.com/find/9000_RS-232
CAN, LIN and FlexRay triggering and decode (N8803B or Option 008 on new scope purchases)
Trigger on and view both protocol layer information and physical layer signal characteristics for
CAN, LIN and FlexRay buses. Numerical decode values are automatically displayed and
synchronized below the captured signal or seen in protocol viewer.
Hardware-based triggering for CAN and LIN means triggering reliably, even on the most infrequent
events. FlexRay uses software-based protocol triggering.
This application works on all models and can use any combination of scope or logic acquisition
channels.
For more information: www.agilent.com/find/9000_CAN
Trigger and view on-screen serial decode
of I
2 C packets.
Trigger on and decode RS-232/UART
transmission.
Trigger on and decode CAN, LIN and
FlexRay serial packets.
JTAG (IEEE 1149.1) triggering and decode (N8817A or Option 042 on new scope purchases)
This application displays real-time time-aligned decode of JTAG (IEEE 1149.1) TDI and TDO signals.
The application eliminate the dificult task of manually determining JTAG TAP controller states, in-
struction and data register decode, and lags error conditions. The application includes scan chain
description features including the ability to import .bsdl iles for each device and displays device
names and opcodes in the protocol listing.
This application works on all models and can use any combination of scope or logic acquisition
channels.
For more information: www.agilent.com/find/9000_JTAG
Import BSDL files and decode JTAG
scan chain activity.