Atec Agilent-Infiniium-9000 Series - Manual (Page 23)

23
Infiniium 9000 Series performance characteristics
Display
Display 15 inch color XGA TFT-LCD with touch screen
Display intensity grayscale 64-level intensity-graded display
Resolution 1024 pixels horizontally x 768 pixels vertically
Annotation Up to 12 labels, with up to 100 characters each, can be inserted into the waveform area
Grids Can display 1, 2 or 4 waveform grids
Waveform styles Connected dots, dots, variable persistence, infinite persistence, color graded infinite persistence.
Includes up to 64 levels of intensity-graded waveforms.
Waveform update rate Segmented mode: Maximum up to 250,000 waveforms/sec
(10 GS/s, 50 ns/div, sin(x)/x: on) Real time mode Maximum of 4,000 waveforms/sec.
Typical of 2,100 waveforms/sec with 1kpts memory.
Typical of 420 waveforms/sec with 100 kpts memory
Typical of 400 waveforms/sec with 1 Mpts memory
Typical of 300 waveforms/sec with 10 Mpts
Computer system and peripherals, I/O ports
Computer system and peripherals
Operating system Windows 7 Embedded Standard
CPU Intel® Core 2 Duo, M890, 3.0 GHz microprocessor
PC system memory 4 GB
Drives ≥ 250-Gb internal hard drive (optional removable hard drive), external DVD-RW drive (optional)
Peripherals Optical USB mouse and compact keyboard supplied. All Infiniium models support any Windows-
compatible input device with a PS/2 or USB interface.
File types
Waveforms
Compressed internal format (*.wfm), comma separated values (*.csv), .hdf5, .bin, tab separated
values (*.tsv), ability to save .osc (composite including both setup and waveform.
and Y value files (*.txt)
Images BMP, TIFF, GIF, PNG or JPEG
I/O ports
LAN RJ-45 connector, supports 10Base-T, 100Base-T, and 1000Base-T. Enables Web-enabled remote
control, e-mail on trigger, data/file transfers and network printing.
RS-232 (serial) 9-pin, COM1, printer and pointing device support
PS/2 Two ports. Supports PS/2 pointing and input devices.
USB 2.0 Hi-Speed Three 2.0 high-speed ports on front panel plus four ports on side panel. Allows connection of USB
peripherals like storage devices and pointing devices while the oscilloscope is on. One device port
on side for instrument control
Video output 15 pin XGA on side of scope, full output of scope display or dual monitor video output, DVI
Auxiliary output DC (± 2.4 V); square wave ~755 Hz with ~200 ps rise time.
Time base reference output 10 MHz, Amplitude into 50 ohms: 800 mV pp to 1.26 V pp (4 dBm ± 2 dB) if derived from internal
reference. Tracks external reference input amplitude ± 1 dB if applied and selected.
Time base reference input Must be 10 MHz, input Z = 50 ohms. Minimum 500 mV pp (–2 dBm), maximum 2.0 V pp (+10 dBm).
LXI compliance LXI Class C