Atec Espec-ESX Series - Manual (Page 4)

SCP-220 Programmer >>
An ESPEC Exclusive:
Remarkably simple to use and understand
Imagine walking up to your new chamber and immediately being able to get
your test running. It was revolutionary when computers became easy to use—
now ESPEC does the same for environmental testing. The SCP-220 makes it a
breeze to set up, run, and monitor your chamber, even for the infrequent user.
You won't find a controller from any other chamber manufacturer that's as
easy to use.
Our active-matrix LCD display is easy to check at a glance. The touch-screen
prompts are logical and navigation is easy. When data entry is required, a
numeric or alphanumeric keypad is displayed. With 150 help screens
(including maintenance instructions), you may rarely need to refer to
your manual. Alarm screens diagnose the type of problem and provide
troubleshooting help.
The SCP-220 comes preprogrammed with 10 standard tests, but you can add
20 more. For easy recall, you can store each program with a 16 character
name. Even complex programs with pauses and loops are easy to set. The
display automatically draws your test profile as you enter it, reducing the
chance of programming errors.
For improved performance, an optional product temperature control feature
is available that drives air beyond the temperature set point, speeding recovery
of the product temperature. Also optional are computer interfaces with
downloadable software or LabView drivers for remote control and data-logging.
Brings a High-End User Interface to Everyone…
Without a Premium Price
SCP-220 PROGRAMMER/CONTROLLER
Display Color TFT (Active Matrix),
640x480 resolution (6.5 inch)
Control Method PID (Proportional, Integral, Derivative)
Communications GP-IB, RS-485
(optional) or RS-232
Operating Modes STOP chamber off, programmer on
(as indicated in upper PGM: RUN running selected test profile
left of the display) CONSTANT running at set value continually
Program Capacity • 20 programs, 99 steps per program
• 10 pre-programmed tests stored in ROM
• Linking between programs possible
Programming Capabilities • Copy programs, even from ROM
• Copy, edit, insert, and delete steps
• Two nested loops to repeat steps 99 times
• Selectable end-of-test modes
• Create pause steps within programs
• Soak control delays timer until
setpoint is reached
Additional Functions • Alarm report lists last 100 alarms and
time occurred
• Time signal relay control
• High and low limit alarm functions
• Audible alarm with on-screen explanation
• Selectable restart modes after power failure
• Calendar timer for automatic start and stop
• Keylock protection and configuration lock out
• Service guide and help screens
• Adjustable trend graph display with up to
15 day history
Look for this icon indicating
products equipped with the
SCP-220 programmer
SCP-220TS version for thermal shock models has similar,
but different screens and capabilities than shown here.
T
O
U
C
H
SC
REEN
P R O G RA M
M
E
R
3 Go ESPEC: www.espec.com