Atec Espec-ESX Series - Manual (Page 11)

Criterion
A wide range and small size for flexibility
-68 to 180
°
C standard range
The ESPEC Criterion benchtop chamber provides a simple and economical solution for
a variety of temperature testing requirements. The 1.2 cu. ft. interior size is popular for
component level tests. The system runs directly off of 115V power, meaning no special
power hook-ups.
A four inch diameter cable port in the left side allows wires and cables to be run to your
samples, if needed. A viewing window and light are available as options.
The programmer allows up to 256 cycling steps to be entered, including controlled
ramps with guaranteed soak. A computer interface is included for remote operation.
A temperature deviation display with alarm is just one part of a three-tier overheat
protection system—a thermal fuse and a user-set independent temperature limit are
also included.
ECT-3 (37"w x 21"d x 25"h exterior)
Interior Dimensions
Model Interior Volume WxDxH Temperature Range
ECT-3 34 L (1.2 cu. ft.) 40x28x30 cm -68 to 180 ° C
(16x11x12 in) (-90 to 356
°
F)
10 Go ESPEC: 877-463-7732