Atec Espec-ESX Series - Manual (Page 10)

A terrific choice for small temperature and
humidity applications
Ergonomics are much like a small refrigerator
The ESPEC Lab Series is a compact, reliable test
chamber suitable for a wide variety of applications.
Pharmaceutical, automotive, materials, and electronic
industries have all found these models to be useful
for temperature/humidity testing.
This model series runs directly off of 115V power,
meaning no special power hook-ups. Humidity
models feature a built-in water tank to eliminate the
need for plumbing, as well.
To ensure a controlled environment, these models
are available with an inner glass door, allowing door
openings without disrupting the conditions. A one
inch diameter cable port in the left side allows wires
and cables to be run to your samples.
The controller is programmable with up to nine
steps to allow controlled ramps of temperature and
humidity. Repetition of the program can be done up
to 999 times. The controller can also be easily set at a
single setting for constant operation.
Interior Dimensions
Model Interior Volume WxDxH Temperature Range Humidity Range
LU-113
LH-113
LHL-113
LHU-113
• Catalog available
105 L
(3.7 cu. ft.)
50 x 39 x 60 cm
(19.7x15.4x23.6 in)
40 to 95%RH
45 to 95%RH
none
-20 to 85
°
C
(-4 to 185
°
F)
LHU-113 (26"w x 32"d x 43"h exterior)
Lab Series
5 to 85
°
C
(41 to 185
°
F)
-20 to 85
°
C
(-4 to 185
°
F)
45 to 85
°
C
(110 to 185 ° F)
9 Go ESPEC: www.espec.com