Atec Espec-ESX Series - Manual (Page 16)

Two/Three Zone
Thermal Shock
Hot/cold or hot/ambient/cold
tests possible
Small footprint and large workspace
Traditional three zone thermal shock chambers can
be quite large, as three separate chambers are used.
The TSA series has just one chamber, circulating
cold, hot, or ambient air, as needed.
The conditioned air can be pre-cooled or pre-heated
beyond the setpoint, allowing quicker recovery of
the desired condition after transfer.
• Test samples don’t move.
• Horizontal airflow design assures uniform results
• Extremely compact systems with a vertical
sliding door for added space savings
• The touch-screen controller is specifically
designed for thermal shock testing
TSA-71S-W (4.3'w x 4.5'd x 6.3'h exterior)
T
O
U
C
H
SC
REEN
P R O G RA M
M
E
R
• Catalog available
Performance example
Temperature Test Load
Model Range Temperature Range Recovery Time IC Chips Interior Volume
TSA-71H-W Two zone
70 L
-65 to 150
°
C
(2.5 cu. ft.)
Mil-Std 883 1010.7 C
TSA-71S-A
TSA-71S-W
TSA-101S-W
TSA-201S-W
TSA-41L-A
TSA-71L-A
TSA-101L-A
TSA-301L-W
Hot exposure:
60 to 200
°
C
(140 to 392
°
F)
Ambient
exposure
Cold exposure
-75 to 0
°
C
(-103 to 32
°
F)
Hot exposure:
60 to 200
°
C
(140 to 392
°
F)
Ambient
exposure
Cold exposure:
-65 to 0
°
C
(-85 to 32
°
F)
Three zone
-65 to ambient
to 150 ° C
Three zone
-55 to ambient
to 150
°
C
15 min. worst-case
10 kg (22 lb.)
product recovery
5 min.
upstream air
10 min. upstream air
5 min. upstream air
10 min. upstream air
20 kg (44 lb.)
24 kg (53 lb.)
5 kg (11 lb.)
20 kg (44 lb.)
2.5 kg (5.5 lb.)
70 L
(2.5 cu. ft.)
200 L
(7.1 cu. ft.)
40 L
(1.4 cu. ft.)
70 L
(2.5 cu. ft.)
110 L
(3.9 cu. ft.)
300 L
(10.6 cu. ft.)
110 L
(3.9 cu. ft.)
15 Go ESPEC: www.espec.com