Atec Espec-ESX Series - Manual (Page 21)

Liquid immersion—the ultimate in thermal shock testing
Robotic transfer from hot to cold
Our liquid-to-liquid chambers are excellent for imposing extreme thermal
stresses on specimens. An air-tight workspace and multiple recovery systems
limit the loss of expensive test fluids, making liquid thermal shock a much
more economical choice than in the past. The controller makes operating the
system simple, and the robotic transfer mechanism is durable and reliable.
TSB-5 (4.5'w x 4.3'd x 5.8'h exterior)
Liquid Thermal Shock
Performance Example
Test Load Interior Dimensions
Model Range Temperature Range IC Chips Interior Volume WxDxH
TSB-2 0.75 kg (1.6 lb.) 2 L 12x12x15 cm
(0.07 cu. ft.) (4.7x4.7x5.9 in)
TSB-5 1.5 kg (3.3 lb.) 5 L 15x20x15 cm
(0.18 cu. ft.) (5.9x7.9x5.9 in)
TSB-20 7.2 kg (16 lb.) 20 L 27x28x29 cm
(0.7 cu. ft.) (10.6x11x11.4 in)
Hot bath:
70 to 200
°
C
(158 to 392
°
F)
Cold bath:
-65 to 0
°
C
(-85 to 32
°
F)
-65 to 85
°
C
Mil-Std 883
method 1011.9
• Catalog available
T
O
U
C
H
SC
REEN
P R O G RA
M
M
E
R
20 Go ESPEC: 877-463-7732