Atec Agilent-N4010A - Manual (Page 4)

4
Sensitivity – multi-slot packets
Link conditions
Link mode Test mode (loopback)
Hopping On or off
Packet type DH1, DH3, DH5
Payload PRBS9, BSOO, BSFF, BSOF, BS55
Number of bits 1 to 200,000,000
Impairments – default to table
Frequency offset ±75 kHz
Modulation index 0.28 to 0.35
Modulation index resolution 0.01
Symbol timing –20 ppm, 0, +20 ppm
Symbol timing resolution 1 ppm
Measurement
Supported measurements BER, number of bit errors, number
of Rx bits, PER, number of NACK
packets, number of errored packets,
number of Tx packets
Number of measurement
channels 1
3, hopping
Range 0 to –91 dBm
Resolution 0.1 dB
Accuracy 2, 3 ±0.6 dB, –35 to –90 dBm,
±1 dB, > –35 dBm
Maximum input level
Link conditions
Link mode Test mode (loopback)
Hopping On or off
Packet type DH1, DH3, DH5
Payload PRBS9, BSOO, BSFF, BSOF, BS55
Number of bits 1 to 200,000,000
Measurement
Supported measurements BER, number of bit errors, number
of Rx bits, PER, number of NACK
packets, number of errored packets,
number of Tx packets
Number of measurement
channels 1
3
Range 0 to –90 dBm
Resolution 0.1 dB
Accuracy 2, 3 ±0.6 dB, –35 to –90 dBm,
±1 dB, > –35 dBm
1. Internal sequencer enables three measurements channels to be measured
consecutively. Measurements on all 79 Bluetooth channels are supported.
2. Verified using CW measurements.
3. Add 0.01 dB/°C from 30 to 55 °C, add 0.07 dB/°C from 20 to 0 °C.