Atec Agilent-N4010A - Manual (Page 13)

13
PC Hardware specifications
• Microsoft ® Windows ® 2000 and XP ® only
• 2.4 GHz Pentium ® or equivalent minimum, 2.8 GHz
recommended
• 200 MH available on hard drive
• 256 MB RAM minimum, 500 MB RAM recommended
• USB 2.0, TCP-IP LAN, or GPIB connection to test set
• Agilent I/O Libraries Suite 14.1 or greater. For
information on Agilent I/O Libraries Suite features and
installation requirements, please go to:
www.agilent.com/find/iosuite/datasheet
N4010A general specifications
Frequency reference
Frequency 10 MHz
Accuracy
20 to 30 °C
0 to 55 °C
±1 x 10 -6 (±1 ppm)
±1.5 x 10 -6 (±1.5 ppm)
Aging (first year) ±1 x 10 -6 /year
10 MHz input BNC(f), 50 W
10 MHz output BNC(f), 50 W
Power requirements
Voltage 100 to 240 VAC, 47 to 63 Hz
Power 150 VA maximum
Environmental
Operating temperature 0 to 55 °C
Storage temperature –40 to +70 °C
Operating humidity 15 to 95% relative humidity
(non-condensing)
EMI compatibility Radiated emission is in compliance
with CISPR Pub 11/1990 Group 1
Class A
Inputs/outputs
Front panel
RF input/output Type-N (f), 50 W
Rear panel
10 MHz REF IN BNC(f), 50 W
10 MHz REF OUT BNC(f), 50 W
GPIB IEEE-488
LAN RJ-45, 10/100-T
USB USB 1.0/2.0
Additional rear panel connectivity with N4010A input/output
connectivity Option 110
AUX RF input/output Type-N (f), 50 W
TRIG IN BNC(f), 50 W; input has TTL
compatible logic levels
TRIG OUT BNC(f), 50 W; output has TTL
compatible logic levels
75 MHz IF output SMA (f), 50 W
Event 1 BNC(f), 50 W
Event 2 BNC(f), 50 W
Bluetooth and WLAN triggers,
data, and clock
25-way D (f)
Size and weight
Dimensions (H x W x D)
With handle and bumpers 105 mm x 370 mm x 390 mm
Without handles and
bumpers
105 mm x 330 mm x 375 mm
Weight 5.9 kg (12.98 lbs) for N4010A-101
7.2 kg (15.84 lbs) for N4010A-102,
103
Regulatory information
Product safety Conforms to the following product
specifications:
IEC61010-1:2001/
EN61010-1:2001
CAN/CSA-C22.2 No 1010.1-92
Low voltage directive 72/23/EEC
General conditions The conformity assessment
requirements have been met
using the technical construction
file route for compliance with the
requirements of the EMC Directive
89/336/EEC